Last updated: November 2026
Electrical work in Oregon sits under two agencies. The Construction Contractors Board licenses contractors as businesses, and the CCB lists electrical work among the jobs that need a CCB license (CCB License). The Building Codes Division (BCD) licenses electrical contractors and individual electricians under the Electrical Safety Law, ORS 479.510 to 479.945. The CCB notes that electricians and plumbers are among the few Oregon trades with required construction training (CCB Consumer Tools).
What the electrical law requires
ORS 479.620 says that, subject to the exemptions in ORS 479.540, a person may not:
- Engage in the business of making electrical installations, or advertise as one, without an electrical contractor's license
- Direct, supervise or control electrical installations without a supervising electrician's license
- Make an electrical installation without a supervising or journeyman electrician's license. For single or multifamily dwellings no more than three floors above grade, the statute provides for a limited residential electrician's license under ORS 479.630(14)
- Work as an apprentice without an electrical apprentice's license
- Allow an unlicensed person to make an electrical installation on property they own, control or manage
License types you may see
Under ORS 479.630, the state issues these licenses among others:
| License | What it means |
|---|---|
| Electrical contractor | The business license for making electrical installations |
| General supervising electrician | Exam plus at least four years as a general journeyman electrician or equivalent |
| General journeyman electrician | Exam plus at least four years of apprentice-level experience, including at least 1,000 hours wiring single or multifamily dwellings |
| Limited residential electrician | Work on dwellings no more than three floors above grade |
| Electrical apprentice | Licensed trainee working under supervision |
BCD's licensing page says it issues electrical, plumbing, boiler, elevator and manufactured dwelling licenses to individuals and businesses. Look up a contractor or electrician with the BCD license holder search, and check the business's CCB license at the CCB license search.
The homeowner exemption
You don't need a license to make an electrical installation on residential or farm property owned by you or an immediate family member, as long as the property isn't intended for sale, exchange, lease or rent (ORS 479.540(1)). Two limits:
- Code still applies. The exemption doesn't excuse the work from ORS chapter 455, the electrical law, or the rules under them (ORS 479.540(1)(a)).
- Rentals are mostly out. If the home is for rent, lease, sale or exchange, the exemption covers only maintenance of existing installations, not new installations or substantial alterations. A landlord or landlord's agent may replace an existing garbage disposal, dishwasher or electric water heater with a similar appliance of 30 amps or less, single phase (ORS 479.540(1)(b)).
If you plan to sell soon after the work, the "not intended for sale" condition is the one to think about before you pick up the tools.
Permits for electrical work
No one may work on a new electrical installation until a permit has been issued, except as ORS 479.540 provides (ORS 479.550). BCD's homeowner guidance lists (BCD, About Oregon residential building permits):
Permit required
- Installing or altering permanent wiring or electrical devices
- Running additional wiring, a new or upgraded outlet or light fixture, a receptacle for a garage-door opener, converting a fuse box to circuit breakers
- Repairing broken or damaged outlets that have a ground fault circuit interrupter
- Installing or altering low-voltage systems such as security alarms, stereo or computer systems
No permit required
- Like-for-like replacement of broken or damaged outlets, light fixtures and switches
- Replacing approved fuses and defective breakers, light bulbs and fluorescent tubes
- Replacing an existing garbage disposal and dishwasher, or similar appliance of 30 amps or less
- Low-voltage wiring for garage door openers, phone outlets and coaxial cable (with properly listed wire)
- Replacing an existing doorbell
The 2026 Oregon Electrical Specialty Code, based on the 2026 National Electrical Code, took effect October 1, 2026 (BCD Adopted Codes).
Hiring an electrician: what to check
- An active CCB license with the right endorsement, plus an electrical contractor license from BCD
- That the person doing the work holds an individual electrician license
- Who will pull the permit, written into the contract
- A written contract if the job is over $2,000, with the CCB consumer notices (contract requirements)
Compare local options on our electricians directory, or request quotes from several.
Related pages
Sources
- ORS 479.540, 479.550, 479.620, 479.630
- BCD: About Oregon residential building permits
- BCD: Individual and contractor licenses
- BCD: Adopted codes online
- CCB: CCB License and Consumer Tools
Frequently Asked Questions
Can I do my own electrical work in Oregon?
Yes, on residential or farm property you or an immediate family member owns, if the property isn't intended for sale, exchange, lease or rent (ORS 479.540(1)). The work still has to meet the electrical code and the state building code, and new electrical installations need a permit (ORS 479.550).
What licenses does an Oregon electrician need?
The business needs an electrical contractor's license (ORS 479.630(1)), and the individuals making installations need a supervising electrician's, journeyman electrician's or limited residential electrician's license, or an apprentice license while training (ORS 479.620). The Building Codes Division issues them. The CCB also lists electrical work among the jobs that need a CCB contractor license.
Which electrical jobs need a permit in Oregon?
Building Codes Division lists installing or altering permanent wiring or devices, adding outlets or light fixtures, converting a fuse box to breakers and installing low-voltage systems such as security alarms. Like-for-like replacement of outlets, switches and light fixtures, and replacing a dishwasher or disposal of 30 amps or less, do not need a permit.